Jeremy Laughridge
  • Male
  • Deland, FL
  • United States
Share on Facebook

Jeremy Laughridge's Discussions

Mag Help
3 Replies

I just received the missing manual for one of my Bergs and in the packet was an extra XR9 Mag. The mag appears to be more shiny than my others and has two holes in the front and back as my originals…Continue

Started this discussion. Last reply by Jeremy Laughridge Apr 3.

Feed Back on XR9-S SN#s 2120 & 2143
5 Replies

I have asked about my numbers in prior post but have yet to have any luck in regards to any feedback and was hoping Mark would have some insight but maybe he doesn't want to make any assertions with…Continue

Started this discussion. Last reply by John s neska Mar 20.

Extra Spring & Little Plastic Tube with Blue Colored Material ?
10 Replies

I acquired both my Bobergs from my local dealer and in one of my cases is a extra pair of sites, a coil spring that is about a 1 1/2 long and 3/8 in diameter and a little plastic tube filled with…Continue

Started this discussion. Last reply by Bob Cohee Mar 18.

Upgraded Coated Barrel and Unlock Block
6 Replies

As original Arne BB owners are we able to purchase the BullPup’s coated barrel and unlock block? quote from Bond "This was done to eliminate the black gooey anti-seize grease that Boberg used. This…Continue

Started this discussion. Last reply by Art Courville Mar 24.

 

Jeremy Laughridge's Page

Latest Activity

Jeremy Laughridge replied to Jeremy Laughridge's discussion Mag Help
"Thanks Mark!"
Apr 3
Mark Dante replied to Jeremy Laughridge's discussion Mag Help
"mag bodies changed slightly from time to time. but only cosmetically. the important element is the springs. they should be dull, almost "rusty" in appearance. if they are shiny, you need to replace them with the proper springs!"
Apr 3
Jeremy Laughridge replied to Jeremy Laughridge's discussion Mag Help
"Anyone ?"
Apr 1
Jeremy Laughridge posted a discussion

Mag Help

I just received the missing manual for one of my Bergs and in the packet was an extra XR9 Mag. The mag appears to be more shiny than my others and has two holes in the front and back as my originals have only one hole on the back and no holes in the front? Why are they different and which one is the latest design ? Thanks Indy
Mar 31
Art Courville replied to Jeremy Laughridge's discussion Upgraded Coated Barrel and Unlock Block
"Great info, thanks"
Mar 24
MM replied to Jeremy Laughridge's discussion Upgraded Coated Barrel and Unlock Block
"Boberg told me $300 for barrel and locking block and only available for XR9S I sent mine into Robar for $50 barrel and $30 locking block to finish with NP3 They did my XR9S and XR45 just got them back, looks and works great"
Mar 24
Art Courville replied to Jeremy Laughridge's discussion Upgraded Coated Barrel and Unlock Block
"Looks like the coating is .001 thick; if you coat an existing barrel and unlock block, do you risk making them too tight?"
Mar 23
John s neska replied to Jeremy Laughridge's discussion Feed Back on XR9-S SN#s 2120 & 2143
"My XR9S has 1150 rounds through it.  Followed the accepted ammo very closely.  No problems with ammo.  Had pin #37 just ahead of rear site shift to right side maybe 3/16 of an inch.  Bond replaced and said pin was never locked in…"
Mar 20
Jeremy Laughridge replied to Jeremy Laughridge's discussion Feed Back on XR9-S SN#s 2120 & 2143
"Thank you Bob....thank you so much! that was exactly the kind of feedback I was looking for and I would imagine others too will appreciate. Best Jeremy"
Mar 20
Bob Cohee replied to Jeremy Laughridge's discussion Feed Back on XR9-S SN#s 2120 & 2143
"The XR9s that I have shot the most is #360 and has had no updates and I have had no troubles with it. The numbers you have are fairly late in the series and I would not worry about them.  I doubt that there were many if any updates past your…"
Mar 20
Jeremy Laughridge replied to Jeremy Laughridge's discussion Feed Back on XR9-S SN#s 2120 & 2143
"Thank you Mollie...good point. Again does anyone want comment on their numbers with a brief description of lessons learned and upgrades made or hopefully not needed at a certain point?"
Mar 20
Mollie replied to Jeremy Laughridge's discussion Feed Back on XR9-S SN#s 2120 & 2143
"If you put a few hundred rounds through each pistol, you'll know what, if any, the problems are."
Mar 18
Jeremy Laughridge posted a discussion

Feed Back on XR9-S SN#s 2120 & 2143

I have asked about my numbers in prior post but have yet to have any luck in regards to any feedback and was hoping Mark would have some insight but maybe he doesn't want to make any assertions with out knowing all the facts history, care etc ect ... ? Just to be clear .... I understand that every pistol stands on its own and has its own inherit problems and there are no guarantees in this world. So again not knowing all the details and with my limited knowledge from what I understand is that…See More
Mar 18
Bob Cohee replied to Jeremy Laughridge's discussion Extra Spring & Little Plastic Tube with Blue Colored Material ?
"I guess I do not know what you are saying here Mark.  The first R9 I purchased was junk but after that I have several good ones. What does spring size have to do with it?"
Mar 18
Jeremy Laughridge replied to Jeremy Laughridge's discussion Extra Spring & Little Plastic Tube with Blue Colored Material ?
"Mark, I know this is off topic but your the best resource here I have 2120 & 2143 am i in a good spot to where a lot of the bugs were worked out or not ? I travel a lot and have yet to be able to shoot them. Best Jeremy"
Mar 16
Mark Dante replied to Jeremy Laughridge's discussion Extra Spring & Little Plastic Tube with Blue Colored Material ?
"that is a rohbaugh recoil spring. the blue liquid is blue (meduim hold) threadlock. it is what we used on all screws in the pistol. you can see from the size of the recoil spring, why the rohbaughs were never bragged about when it came to the…"
Mar 16

Profile Information

Comment Wall

You need to be a member of Boberg Arms | XR9-S | Power. Performance. Prestige. to add comments!

Join Boberg Arms | XR9-S | Power. Performance. Prestige.

  • No comments yet!
 
 
 

© 2017   Created by Blaine Glynn.   Powered by

Badges  |  Report an Issue  |  Terms of Service